|
This is just a small selection from our range of sizes and pressures, all parts are manufactured from many different materials.
Small
|
In the alphanumeric designations to the left, the prefix PIG denotes a PipeGuard design i.e. gas inside one-piece moulded bag
The number following the prefix that is followed by the letter i denotes the number of cubic inches nominal volume. Units of 16.39millilitres, there are 61 cubic inches in one litre.
The B reference is the diameter followed by length of the one piece moulded bag. This is also the spare part reference for a new bag.
The number preceding the letter p is the design pressure, this should be used for working pressures up to 85% of the p figure assuming that the system relief valve requires a 15% over pressure to fully open.
The inch number denotes National Pipe Thread taper size.
The CS denotes carbon steel of an SA(ASME code) designation.
A letter needs inserting following the CS which denotes the elastomer of the membrane to be used ex/e.g. N = Buna-N / nitrile, V = Viton etc.
|
| PiG-15i-B57x98-4500p-1/2"NPT-CS |
| PiG-40i-B62x207-2500p-3/4"NPT-CS |
| PiG-75i-B72x315-2500p-1 1/2"NPT-CS |
|
Medium
|
| PiG-170i-B123x250-2300p-1 1/2"NPT-CS |
| PiG-200i-B123x295-2300p-2"NPT-CS |
| PiG-240i-B139x205-2500p-2"NPT-CS |
|
Large
|
| PiG-488i-B139x420-2500p-3"NPT-CS |
| PiG-693i-B195x360-3500p-4"NPT-CS |
| PiG-1220i-B230x500-3500p-4"NPT-CS |
Piston Type Accumulators
PistoFram Accumulators
IndAcc Accumulators
IndAcc Accumulator Sizes
MagdAcc Accumulators
MagdAcc Accumulator Sizes
PistoLite Accumulators
Pistolite Accumulator Sizes
PistoLite Accumulator Ports/Porting
Bladder Accumulators
Accumulators - PipeGuard Family
Stainless Steel Accumulator Sizes
PipeGuard Plastic Accumulator Sizes
PipeGuard Accumulators Ports/Porting
Carbon Steel Accumulator
Carbon Steel Accumulator Size
The name Hydropneumatic Accumulator covers those hydraulic products that are designed specifically for the storage (accumulation) of liquid under pressure. However, because of the improvements in design of equipment, which has grown from the storage devices, other functions have become loosely associated with the name Accumulator. These other types of units should more properly be called by their function, e.g. – Pulsation Dampers, Liquid Borne Noise Silencers, Line Surge Alleviators, Pump Controllers, Transfer Barriers, etc. More information about accumulators...
Hydrotrole Special and Stainless Steel Accumulators Home Page..
Accumulating Questions?
Please provide your true name, company name, physical address, telephone and fax numbers (due to large number of spurious e-mails containing viruses).
Within USA, Canada & South America:
Call toll-free...1-888-DAMPERS or Fax toll-free....1-888-TALKDLR or Write....US div. of Hydrotrole Ltd., P.O. Box 506, Hampstead, NC 28443 or email Accumulators@Hydrotrole.net
Europe, UK and Other Countries:
Free 'phone.... 08080-LOW-EURO or 08080-LO-PRICE or Free Fax....0800-174088 or Write.... Hydrotrole Ltd., Membranoflex Works, Greg Street Industrial Center, Reddish, Stockport, Cheshire, SK5 7BS. or e-mail Hydro@Accumulators.co.uk.
|
